SATA Hard Drive Adapter to IDE ATA-100/133 40 Pin Cable

SATA to IDE Adapter

The IDE-SATA04 is a Native SATA Hard Drive to IDE 40-pin Adapter for most enclosures. SATA to IDE converter converts SATA Drives to IDE with UDMA-133/100 interfaces. Has JMicron JM20330 chip-set and supports 3.5″ IDE hard drives and 5.25″ optical drives.

  • Application layer supports both the ATA register command set and PACKET command set
  • Works for both AC and DC couple between the transmitter and the receiver
  • Support 20MHz, 25MHz, 30MHz or 40MHz Reference Clock
  • Automatic Serial ATA 3.0/1.5 Gbps speed negotiation

$21.95

(25 customer reviews)

Out of Stock

Model No. IDE-SATA04

Quick Links:

Description

Our IDE-SATA04 SATA Hard Drive Adapter is a Native SATA Drive to IDE 40-pin Adapter for most enclosures needing a SATA to IDE Converter. The SATA Hard Drive Adapter converts a SATA Drive to IDE, a perfect solution for converting SATA or SATA II devices to IDE ATA 40-Pin UDMA-133/100 interfaces.

JMicron JM20330 chip-set and supports 3.5″ IDE hard drives and 5.25″ optical drives. It’s compliant with IDE specification and supports up to UDMA/133 drives!

 

SATA Hard Drive Adapter to IDE ATA-100/133 40 Pin Cable image

Chip Overview:

JM20330 is a single chip solution for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 JM20330 supports a 1.5GHz data rate, and scalable to 3.0 GHz data rate by directly doubling the internal clock source.

SATA hard drive adapter Master Setting image

The application layer supports both the ATA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin.

SATA Hard Drive Adapter 40 Pin image

Additional Features:

  • This Adapter tested to work with Western Digital, Seagate, Hitachi, Maxtor, Toshiba, Fujitsu and Samsung Drives ranging in Capacity from 80GB up to 2,500GB (2.5TB).
  • Serial ATA 1.0 Specification compliant
  • Automatic Serial ATA 3.0/1.5 Gbps speed negotiation
  • ATA/ATAPI PIO mode 0 to 4
  • ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s.
  • ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count
  • Support Serial ATA hot-plug
  • Ultra low power consumption
  • Work for both AC and DC couple between the transmitter and the receiver
  • Provide specified OOB signal detection and transmission
  • Support Spread Spectrum Clocking to reduce EMI
  • Support 20MHz, 25MHz, 30MHz or 40MHz Reference Clock
  • Support Partial/Slumber power management
  • Provide adjustable TX signal amplitude and pre-emphasis level
  • Master IDE Device support

OS Support:

  • Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, and Windows 8
  • Linux and Mac OS 10.X
Specifications

Product Specifications

Identifier
UPC

736983900036

Other Data
Warranty

1 year from date of purchase

Weight

.3 lbs

Dimensions

3 × 2 × .75 in

UPC: 736983900036
Support

Product Documentation & Drivers


Need drawings, CAD files, or other compliance documentation? Click HERE

Reviews (25)

25 reviews for SATA Hard Drive Adapter to IDE ATA-100/133 40 Pin Cable

  1. Chris

    Bought this a while ago and thank God it was sitting out in my sight when I needed it to rebuild an old server. Was trying to plug new SATA drive into an old IDE Dell Optiplex tower.

    Couldn’t get to work at first but chat session appeared on this page and Luke instructed me to remove jumper and make master. Worked great after that. Back up and running. Very easy to use.

    Thanks!

  2. Mark

    finally got the Adapter today. It looks sturdy and strong. not like those cheap flimsy adapter board out there.connectors were made of high quality plastic and proper electrical components. and 1 yr warranty to boot unlike some of those other brands that offer 1 month.!!!

    I didn’t get time to install it yet inside my tower, hoping to do it later today.

    overall very good item,and guess what their tech support and sales staff definitely know what there doing.

    Ordering was Quick and efficient.

    very good item exactly what i needed to install a 500 Gb SATA Hard drive inside my dell tower which doesn’t have SATA ports !!!

  3. polkaholic

    It took me a while to get time to install (4) SATA hard drives into a legacy motherboard computer designed for PATA (IDE) hard drives. Paying attention to the jumper on the board (master/slave) I now have (4) large hard drives working on this computer. I am so happy to find this product. It was shipped immediately upon placing the order and arrived very promptly. I will order these again if more are ever needed.

  4. fromerop

    This sata adapter worked flawless since the beginin on my coputer as a trail. My intentions is to used it in a Phillips DVD Recorder witn a Pata HDD to store recordings. The DVD is developing I/o errors randomly and this type of HDD are expensive and hard to find becouse they are becoming absolete. So I would like to use a Sata HDD replacing the original HDD. I am trying a 500 GB HDD but the machine did not recognized the Drive. I am getting a 250 GB and will try again. I had no time lately to do this but as soon as I do I will update with the results. Using this adapter on a PC works as intended.

  5. Karee

    We have purchased almost 1000 pieces over the last 3 years. The product works great for our customer, and we have not had any that did not work.

Add a review