Single Port Industrial Adapter USB 2.0 to RS-232 / 422 / 485 w/ FTDI Chip

RS-232 | 384 Bytes Receive | 128 Bytes Transmit | FTDI

  • Expand Your Serial Capabilities: Connect your legacy 9-pin serial device through a USB-A port to add legacy functionality to newer technologies with no serial port connections.
  • Safe Connections: Designed with a unique system load reduction feature, the Mini USB to Serial Adapter also offers 15kV surge protection for connected devices.
  • Plug-&-Play: The adapter’s power is drawn from a USB connection for ease of access and is compatible with Windows (up to Win 11), Mac OS, and Linux.
  • Effortless Port Configuration: The adapter is designed with external dip switches to set RS-232, RS-422 or RS-485 ports and different operation modes conveniently.
  • COM Retention: COM Ports are fully configurable, and after reboots, port assignments are preserved.
  • Upstream: 1 USB port, Type A Male Connector
  • Downstream: 1 Male DB9, w/ nuts

$65.95

In stock

Volume Pricing

Units Discount Price
1 - 4 $65.95
5 - 11 3 % $63.97
12 - 24 5 % $62.65
25 - 49 7 % $61.33
50+ 10 % $59.36

Also available from:

Model No. USB-COMiPLUS

Description

Introduction:

The USB-COMiPLUS USB 2.0 Industrial Adapter allows you to add one RS-232, RS-422 or RS-485 serial port by connecting to a USB port. The upper case on the device slides open for adjusting the mode settings from RS-232, RS-422, RS-485, the device is user selectable. Once the drivers are installed and the device is plugged in, it will be installed as a standard COM port on your computer.

 USB 2.0 Industrial Adapter with User Selectable serial mode image - USB-COMiPLUS

Features:

  • Adds one RS-232 serial port by connecting to a USB port
  • One DB9 male connector
  • Optional feature to supply power output of DC 5V through PIN-9 of DB9 male to the serial devices requiring power
  • Optional feature to supply power output of 5V, 200mA – upper case by sliding open for easy to supply DC 5V power
  • Installed as standard Windows COM port
  • Full RS-232 modem control signals and hardware/software flow control
  • RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
  • RS-232 data signals with DC 5V: TxD, RxD, RTS, CTS, DSR, DTR, DCD, DC 5V, GND
  • High speed serial port with the baud rate up to 921.6K bps
  • Non-standard baudrates supported
  • LEDs of Power, TxD and RxD for easy port monitoring and diagnostic
  • Serial port protected with surge protection of 15KV
  • Powered by USB port, no external power adapter required
  • Easy plug and play installation and RS-232 device connection
  • COM port number assigned can be changed to any COM port number required
  • Works with USB 1.1 & 2.0 host port

OS Support:

  • Windows 7, Windows 8, Windows 10, and Windows 11
  • Linux and Mac OS 10.X

Package Contents:

  • Selectable USB 2.0 RS-232 / 422 / 485 serial adapter
  • Driver Disc
Specifications

Product Specifications

Environmental
Operating Temperature

0°C to 55°C (32°F to 131°F)

Storage Temperature

-20 to 75°C (-4 to 167°F)

Humidity

5% ~ 95% (non-condensing)

Performance
ESD Protection

15KV Surge Protection

Isolated/Surge Protected

Yes

Hardware
Chipset

FTDI

Product Information
Warranty

1 year from date of purchase

Power
External Power Required

No

Software
OS Support

Win 11, Linux, Mac OSX, Win 10, Win 7, Win 8

Serial Attributes
RS Signals

TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND

Serial Standards

RS232, RS422, RS485

FIFO Receive

384 bytes

FIFO Transmit

128 bytes

Data Bits

5, 6, 7, 8

Parity

None, Even, Odd, Mark, Space

Stop Bits

1, 1.5, 2

Flow Control

Hardware (RTS, CTS), XON/XOFF

Serial Ports

1

USB
USB Type

USB 2.0

Isolated/Surge Protected

Yes

Screw Lock Compatible

Yes

Mechanical
Color

Black/White

Ports

1 Serial Port

Material of Construction

Plastic

Other Data
Chip Model

FT232RL, MAX3089E, ZT213LFEA

Connector

DB9 Male w/ Nuts

Weight

.4 lbs

Dimensions

4 × 4 × 2.25 in

UPC: 729440690953
Pin-Outs

DB9 RS-232 Pin-Outs

DB9 RS-232 Pin-Out Diagram
DB9 RS-232 Pin-Out Chart
[/row]

DB9 RS-422 Pin-Outs

DB9 RS-232 Pin-Out Diagram
DB9 RS-232 Pin-Out Chart

DB9 RS-485 Pin-Outs 2-Wire

DB9 RS-232 Pin-Out Diagram
DB9 RS-232 Pin-Out Chart

DB9 RS-485 Pin-Outs 4-Wire

DB9 RS-232 Pin-Out Diagram
DB9 RS-232 Pin-Out Chart
Optional Accessories

Optional Accessories

The USB 2.0 to RS232/422/485 selectable adapter has certain accessories that work with it. These accessories are what you can order if needed.

RS232 Male to Female Serial Data Cable Complete your serial data connection with this 5ft. RS232 DB-9 Male to Female data cable for fast reliable…

Model# 9DBMF5FT

$2.95

In stock

Support

Product Documentation & Drivers


Need drawings, CAD files, or other compliance documentation? Click HERE

Serial F.A.Q.

Product F.A.Q.

View frequently asked product questions below. For all serial troubleshooting, visit this page.
Still need help? Reach out!

  • How do I clean and reinstall my FTDI drivers?
      1. Download the CDM Uninstaller HERE.
      2. Extract the zip file, or open the “CDMuninstallerGUI.exe” utility.
      3. Leave the ‘Vendor ID’ set to 0403 and ‘Product ID’ set to 6001.
      4. Click Add.
      5. Click Remove Devices.
      6. Download the corresponding driver for your operating system and follow on-screen prompts. Windows Driver | MacOS Driver

    Video tutorial here.

  • How can I change my device’s COM port?
      1. Click on Start and navigate to the Control Panel
      2. Locate and click on Device Manager
      3. Under “Ports (COM & LPT)” you will find your serial device titled “USB Serial Port” along with its current COM Port.
      4. Right click on “USB Serial Port” and click on Properties.
      5. Navigate to the “Port Settings” tab and click on “Advanced…”
      6. Once there, the “COM Port Number:” can be changed with a dropdown menu to select the port number.
      7. Click your desired port number (i.e. COM2) and click “OK”.
      8. Click “OK” once more.
      9. Your serial device is now assigned to your chosen COM Port.

     

  • How do I check to ensure the COM port is listed properly in Windows?
    To ensure your serial device is installed properly, complete the following:

    1. Press Windows Key + R to open the Device Manager. Once Run comes up, type “devmgmt.msc” into the text field and press Enter.
    2. Expand the section labeled, Ports (COM & LPT).
    3. You should now see a COM number in brackets to the right of each port. If the device is installed properly, no exclamation points or question marks should be present next to the device.
  • I have everything hooked up, but nothing is functioning correctly.
    To rule out potential issues, quickly test your individual components to ensure that they are working correctly individually, and are not the source of the problem:

    • Serial cables
    • Serial ports
    • Serial devices

    Test your components by:

    • Hook up the serial cable(s), serial port(s), and serial device(s) in a different setup to see if the issue stems from a particular component, or the setup as a whole.
    • Replace the serial cable, port, or device within your setup to further troubleshoot the issue’s origin.

    When testing cables:

    • Test each cable individually.
    • Use short cables when you are testing.

    When testing serial ports and devices:

    • Press the Windows key + R, in Run, type devmgmt.msc, and press Enter to open the Device Manager. You can then check to see if your device is listed under Ports (COM & LPT).
    • Ensure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
    • If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
  • Serial communication is not functioning correctly, how can I tell if the problem caused by the adapter or my serial software application?
    Older serial communication applications make use of legacy hardware addresses, often incompatible with PCI, PCIe, and USB to Serial products. Contact the software provider to troubleshoot.
  • I am receiving an error when I try to install the drivers in Windows 8 64 bit.
    Driver Signature Enforcement in Windows 8 may need to be disabled in order to use various drivers. After disabling this feature, the driver will be allowed to install.

    Note: You are required to restart your computer after disabling the Driver Signature Enforcement. Save all open work on your computer.

    Disable driver signature enforcement:

    1. Press the Windows key + C.
    2. Click Settings > Change PC Settings.
    3. In the left pane, click General.
    4. In the right pane, under Advanced startup, click Restart now.

    When your system restarts:

    1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
    2. Press 7.

    When your computer restarts, Driver Signature Enforcement will be disabled and you can install the drivers.

  • I am receiving an error when I try to install the drivers in Windows 10 64 bit.
    Driver Signature Enforcement in Windows 10 may need to be disabled in order to use various drivers. After disabling this feature, the driver will be allowed to install.

    Note: You are required to restart your computer after disabling the Driver Signature Enforcement. Save all open work on your computer.

    Disable Driver Signature Enforcement:

    1. Click the Windows icon in the taskbar.
    2. Click Power.
    3. Press and hold the Shift key and click Restart.

    After your computer restarts:

    1. Click Troubleshoot Advanced Options Startup Settings Restart.
    2. Press 7.

    When your computer restarts, Driver Signature Enforcement will be disabled and you can install the drivers.

  • Why did the software not install properly in macOS High Sierra (10.13) or later?
    High Sierra 10.13 and later versions of macOS enforce strict security policy revisions. In order for the device to operate, software packages like those used in this installation must be allowed in macOS Security and Privacy settings once the software is installed.

    Once the driver/software is installed, follow these steps to allow the software:

    1. Open System Preferences.
    2. Open Security & Privacy.
    3. Click the Allow button near the bottom of the General tab.