4 Port USB 3.2 Gen 2 Micro Powered Hub DIY Per Port Port Power Control PCBA w/ GL3590 Chipset

Model No. CG-3590X4AX1C-PDv1-0-DEV

+7~14V DC Input | Surge Protection | 5 Gbps

  • Protect Your Equipment: The 4-port hub  features 15kV ESD surge protection to keep your connected peripherals safe from harm.
  • Super Fast Speeds: This USB hub is 3.2 Gen 1 compliant, ensuring super-fast 5Gbps data transfer speeds. It supports super speed, high speed and full speed which enables it to be compatible with USB 2.0 / 1.1.
  • Uhubctl Compatibility: UhubCTL compatibility, an open-source utility to control USB power per-port on smart USB hubs.
  • Chipset: GL3590
  • Upstream: 1 USB port, Type C connector
  • Downstream: 4 USB ports, Type A connectors
  • Power Connector: DC Barrel 2.5mm ID × 5.5mm OD, Center Pin Positive
**Notice: This product is currently under development and is only available for purchase in limited quantities to ensure availability for all customers wishing to evaluate the product. Development products are intended for evaluation and testing purposes only and are not meant to be treated as full, finished products. Designs may change at any time. For more information please refer to the Development Product Terms. Read our full DEVELOPMENT PRODUCT TERMS here.

$59.99

Bulk Pricing

Model No. CG-3590X4AX1C-PDv1-0-DEV

Out of stock

Need some help? Contact us.
Description

Introduction

USB 3.2 Gen 2 powered micro hub PCBA. The CG-3590X4AX1C-PDv1.0-DEV is a +7~14V DC input, USB 3.2 Gen 2 hub PCBA with ESD and Surge protection. Each port is protected individually to help keep your peripherals safe. This hub uses a CCG3 PD Cypress chip, each port is on an individual circuit to maintain high current and protection. Features per-port power switching capability for compatibility with uhubctl.

UhubCTL

UhubCTL is an open-source utility to control USB power per-port on smart USB hubs. Smart hub is defined as one that implements per-port power switching. Benefits of uhubctl include:

  • Enhanced Device Management: UhubCTL grants you granular control over your connected devices. Quickly disable power-hungry peripherals or isolate malfunctioning equipment for troubleshooting.
  • Improved System Stability: By selectively cutting power to specific ports, uhubctl can help prevent potential electrical conflicts or overloads, especially when using multiple high-power devices.
  • Energy Efficiency: UhubCTL empowers you to power down unused ports, reducing overall power consumption and extending the lifespan of your devices.
  • Convenience and Flexibility: UhubCTL offers a software-based approach to device management, eliminating the need to constantly reach behind your computer to physically unplug cables.

Visit the UhubCTL github page for more information https://github.com/mvp/uhubctl


Help output from uhubctl.

Example of port being toggled from uhubctl with USB Flash drive attached

Features

  • USB PD 3.2 Gen 2 compliant hub capable of providing power to UFP and DFP ports
  • CCG3 PD “Cypress” chip inside
  • 4 Downstream ports supporting Super-Speed (SS), High-Speed (HS) and Full-Speed (FS) traffic
  • +7~14V DC variable voltage input
  • PD compatible provides advertisement of Single PDO , 5V 3A output on UFP port so it can power low current Mobile devices (tablets/cellphones)
  • Independent ESD protection for each port on all Data Lines for USB 2.0 and USB 3.0 (including input port)
  • All signal lines with integrated rail-to-rail clamping diodes for downstream ESD protection of ±15kV exceeding IEC 61000-4-2, level 4
  • Independent Current/Over Voltage and Under voltage Protection for all 4 DFP A ports
  • Input Power DC jack TVS protected to 16V
  • Isolated GND for Shield Connectors
  • Tantalum and MLCC capacitors throughout design for extended temperature range and duty cycle

Package Contents:

  • USB 3.2 Gen 2 4-Port Micro Hub PCBA
Specifications

Product Specifications

Power
Input Voltage

+7~14V DC

Power Source

AC Adapter Not Included, DC Barrel Jack 2.5mm ID × 5.5mm OD

Idle Consumption

57mA @ 5V / 35.6mA Bus Power

External Power Required

Yes

Per USB Port Current

2A

Compliance
Country of Origin

China

Physical Characteristics
Color

Black

Item Dimensions (L × W × H)

1.89 × 1.58 × 0.75 in.

Item Weight

0.7 lbs.

Ports

4 USB Ports

What's in the Box
Package Contents

PCBA

Software
OS Support

Win 7, Win 8, Win 10, Win 11, Linux, Mac OSX

Environmental
Operating Temperature

0°C to 55°C (32°F to 131°F)

Storage Temperature

-20 to 75°C (-4 to 167°F)

Humidity

5% ~ 95% (non-condensing)

Product Information
Warranty

1 year from date of purchase

Hardware
Chipset

GL3590

Downstream USB Ports

4 Type-A Female USB

Upstream USB Ports

1 Type-C Female USB

Performance & Safety
ESD Protection

15KV Surge Protection for Each Port

Isolated/Surge Protected

Yes

Max Data Transfer Rate

10Gbps

Over Current Protection

Yes

Over Voltage Protection

Yes per buck

Surge Protection

350W

Other Data
USB Interface

USB 3.2 Gen 2

Weight

0.7 lbs

Dimensions

1.89 × 1.58 × 0.75 in

Support

Product Documentation & Drivers


Need drawings, CAD files, or other compliance documentation? Click HERE

Accessories & Replacement Parts

Accessories & Replacement Parts

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “4 Port USB 3.2 Gen 2 Micro Powered Hub DIY Per Port Port Power Control PCBA w/ GL3590 Chipset”