USB 3.1 Hub Component Board with ESD and Surge Protection

USB 3.1 Hub Component Board USB Type-B Port and 5V DC Jack Input

USB 3.1 Hub Component Board Back USB Type-A Ports

USB 3.1 Mini 4 Port Hub Component with ESD Surge Protection - PCBA - Image 6

View Product Documentation, CADs, & Downloads

USB 3.1 Mini 4 Port Hub Component with ESD Surge Protection – PCBA

Name: USB 3.1 Mini 4 Port Hub Component with ESD Surge Protection - PCBA
Brand: CoolGear
SKU: CG-3510S4-Board
Availability: In stock

Model No. CG-3510S4-Board

Mini Component Board for 3.1 Hub Installs

Individual hub circuit board with ESD and Surge protection over each USB port. USB 3.1 Mini 4 Port component board can be installed by itself in equipment or in different configurations for use. Compliant with USB 3.1 Gen1 with up to 5Gbps of data transfer speed.

Compact USB 3.1 Hub Circuit Board with 4 Ports
Supports USB 3.1 Gen1 USB specifications at up to 5Gbps data transfer
Support Self-Powered Mode with 5V DC input jack on board
Backward compatible with USB 2.0 / USB 1.1 data speeds

**Notice: Coolgear strongly recommends purchasing one to two (1–2) units for initial evaluation. This product is intended for integration, evaluation, and testing purposes only, to assess its suitability and identify potential modifications for a specific use case. It is not designed for single-use scenarios. Before integrating this product into your project or placing a large-quantity order, please contact Coolgear to discuss your project requirements. For more details, refer to the Development Product Terms. Read our full DEVELOPMENT PRODUCT TERMS here.

$34.49

Bulk Pricing

Model No. CG-3510S4-Board

REACH

RoHS

In stock

Need some help? Contact us.

Product Documents

Quick Links:

Description

4 Port USB 3.1 Gen 1 Hub PCBA

USB 3.1 Gen 1 USB hub board with ESD and surge protection. The Coolgear CG-3510S4-Board is a 5V DC input (self or bus powered), USB 3.1 Gen 1 hub circuit board for incorporating into equipment, assemblies, or a custom enclosure. It will support fast charging for Apple 1A/2.4A and Samsung Galaxy devices.

Each port is individually protected to help protect your peripheral investments. The USB 3.1 Hub component board uses a GL3510 chip. The GL3510 Hub controller chip features native fast-charging and complies with USB-IF battery charging specification rev1.2.

4 Port USB 3.1 Gen 1 Mini Hub Component Board Features

Compliant with USB 3.1 Gen 1 Specification
Upstream USB Type-B port supports Super-Speed (SS), High-Speed (HS) and Full-Speed (FS) traffic
4 USB Type-A downstream ports support Super-Speed (SS), High-Speed (HS) and Full-Speed (FS) traffic
ESD protection per port: ±15 kV(Air), ±15 kV(Contact)
1 control pipe and 1 interrupt pipe
Backward compatible to USB specification 2.0/1.1
Compliant with Battery Charging 1.2 Specification
Downstream Type-A ports can be used as a Standard Downstream Port (SDP) or Charging Downstream Port (CDP) or Dedicated Charging Port (DCP)
Downstream devices can be charged while upstream VBUS is not present, which can be applied to charger applications
Over current protection on each downstream port
Supporting Apple 1A/2.1A/2.4A and Samsung Galaxy devices fast-charging

Specifications

Hub Controller Chip: GL3510
USB 3.1 Gen 1 Compliant
Supports High Speed Full Speed and Super Speed transmit and Receive
Complies with USB-IF Battery Charging revision 1.2
Automatic switching between self-powered and bus-powered modes
Built-in 5 to 3.3V and 5 to 1.2V regulator
RISC-like architecture
DC Barrel: 2.5mm Inner Diameter, 5.5mm Outer Diameter, Positive Polarity on Center Pin
Item Dimensions: 60.33mm(L) x 39.98mm(W) x 17.67mm(H to connector top)

OS Support: