Live Chat
1-888-688-2188
SATA Hard Drive Adapter to IDE ATA-100/133 40 Pin Cable
SATA to IDE Adapter
The IDE-SATA04 is a Native SATA Hard Drive to IDE 40-pin Adapter for most enclosures. SATA to IDE converter converts SATA Drives to IDE with UDMA-133/100 interfaces. Has JMicron JM20330 chip-set and supports 3.5″ IDE hard drives and 5.25″ optical drives.
- Application layer supports both the ATA register command set and PACKET command set
- Works for both AC and DC couple between the transmitter and the receiver
- Support 20MHz, 25MHz, 30MHz or 40MHz Reference Clock
- Automatic Serial ATA 3.0/1.5 Gbps speed negotiation
$21.95
Out of Stock
Quick Links:
Description
Our IDE-SATA04 SATA Hard Drive Adapter is a Native SATA Drive to IDE 40-pin Adapter for most enclosures needing a SATA to IDE Converter. The SATA Hard Drive Adapter converts a SATA Drive to IDE, a perfect solution for converting SATA or SATA II devices to IDE ATA 40-Pin UDMA-133/100 interfaces.
JMicron JM20330 chip-set and supports 3.5″ IDE hard drives and 5.25″ optical drives. It’s compliant with IDE specification and supports up to UDMA/133 drives!
Chip Overview:
JM20330 is a single chip solution for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 JM20330 supports a 1.5GHz data rate, and scalable to 3.0 GHz data rate by directly doubling the internal clock source.
The application layer supports both the ATA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin.
Additional Features:
- This Adapter tested to work with Western Digital, Seagate, Hitachi, Maxtor, Toshiba, Fujitsu and Samsung Drives ranging in Capacity from 80GB up to 2,500GB (2.5TB).
- Serial ATA 1.0 Specification compliant
- Automatic Serial ATA 3.0/1.5 Gbps speed negotiation
- ATA/ATAPI PIO mode 0 to 4
- ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s.
- ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count
- Support Serial ATA hot-plug
- Ultra low power consumption
- Work for both AC and DC couple between the transmitter and the receiver
- Provide specified OOB signal detection and transmission
- Support Spread Spectrum Clocking to reduce EMI
- Support 20MHz, 25MHz, 30MHz or 40MHz Reference Clock
- Support Partial/Slumber power management
- Provide adjustable TX signal amplitude and pre-emphasis level
- Master IDE Device support
OS Support:
- Windows 98, Me, XP, 2000, 2003, CE, Vista, Windows 7, and Windows 8
- Linux and Mac OS 10.X
Specifications
Product Specifications
| Other Data |
|
|---|
Support
Product Documentation & Drivers
Need drawings, CAD files, or other compliance documentation? Click HERE
Reviews (25)
25 reviews for SATA Hard Drive Adapter to IDE ATA-100/133 40 Pin Cable
Add a review
Related products
Model# SW-SATA2X4
$109.95Not in stock - Backorder allowed
Model# USB2-8COM-M
$214.95In stock
Model# USBG-COM-SI-M
$109.95In stock
Model# USB-16COM-RM
$461.95In stock
Model# USBG-8COM-M
$194.95In stock
Model# iSerial-TB5
$21.95In stock
Model# USBG-2COMi-SI-M
$208.95Not in stock - Backorder allowed
Model# USB-4COMi-SI-M
$384.95In stock
Jeff –
The product was shipped promptly, works great and was reasonably priced.
Jim B –
The SATA to IDE adapter worked seamlessly in our application to transfer data from our SATA master to an EIDE slave. The BIOS was set to auto detect for the SATA and EIDE drives. The SATA drive should be connected to the end connector of the cable and the jumper on the back of the adapter has to be OFF. The EIDE drive is connected to the middle connector of the EIDE cable with its jumper set for slave. This is with a straight cable with no twist in the control lines for a cable select configuration.
The adapter works with the standard 40 pin EIDE connector AND also works with 80 pin cable, as the extra 40 pins are added ground connections for shielding when the drive EIDE drive is used in Ultra DMA mode 2 and higher.
John Mechanical –
It didn’t fit into my computer! The input and output connector pins were offset.
I had to cut the mounting brackets in my computer to allow for the offset.
I also bought a mounting bracket for the Sandisk that I installed. I had to modify that similar but also allow for the ATA-100 connectors sitting “higher” than they should have. Maybe, I just bought all the wrong equipment. Anyway, it’s in and working well.
postf –
Worked great on a Rocstore enclosure and first time. Installed in 2 minutes. Great value. Thanks for the videos on the web site – very clear on application
bl-max –
The adapter works as advertised. I’m using it for a SATA HDD installed in an old Dell Dimension PC as a slave drive to my HDD IDE primary. I’m going to order a couple of more for some of my friends who also have older PC’s.