USB to RS-232 Isolated TTL | CMOS 5ft. Adapter Cable w/ TB

USB to RS-232 Isolated TTL | CMOS 5ft. Adapter Cable w/ TB - Image 2

USB to RS-232 Isolated TTL | CMOS 5ft. Adapter Cable w/ TB - Image 3

USB to RS-232 Isolated TTL | CMOS 5ft. Adapter Cable w/ TB - Image 4

USB to RS-232 Isolated TTL | CMOS 5ft. Adapter Cable w/ TB - Image 5

View Product Documentation, CADs, & Downloads

USB to RS-232 Isolated TTL | CMOS 5ft. Adapter Cable w/ TB

Model No. USB-232TTLMOS-IS

Expand Your Serial Capabilities: Connect your legacy serial device through a USB-A port to add legacy functionality to newer technologies with no serial port connections.
Safe Connections: Designed with a unique system load reduction feature, the Mini USB to Serial Adapter also offers 2,500Vrms Isolation for connected devices.
Plug-&-Play: The adapter’s power is drawn from a USB connection for ease of access and is compatible with Windows (up to Win 11), Mac OS, and Linux.
COM Retention: COM Ports are fully configurable, and after reboots, port assignments are preserved.
Upstream: 1 USB port, Type A Male Connector
Downstream: 5-Pin Terminal Block

$58.99

Model No. USB-232TTLMOS-IS

In stock

Need some help? Contact us.

Product Documentation

Quick Links:

Description

Introduction:

Up until now you’ve had to make a choice between USB to TTL adapters and their voltage with either or selections. This USB to RS-232 isolated TTL/CMOS adapter cable eliminates that by allowing you to choose a voltage setting right at the adapter’s connection point at the terminal block. If there is no need for isolation in your application, this adapter is also available in a non-isolated version.

USB to RS232 isolated TTL with voltage choices via DIP switch

The USB-2323TTLMOS-IS provides a USB to RS-232 port with 5V/3.3V/2.5V/1.8V TTL / CMOS compatible Logic levels. The RS-232 signals include TXD, RXD, and GND with 2,500Vrms Isolation on each signal. The RS232 TTL cable is USB bus powered and does not need any DC power from an external AC Power Adapter. The TTL /CMOS RS232 signals are processed on the 5-pin Terminal Block.

Terminal Block Configuration:

Pin 1    TXD (Output)
Pin 2    RXD (Input)
Pin 3    VOUT (Output TTL / CMOS Power)
Pin 4    VIN (Input TTL / CMOS Power)
Pin 5    GND (Ground for TTL / CMOS)

Features:

Provides 1 TTL/CMOS RS232 Serial Port over USB Port
Supports 3-Signal TTL/CMOS RS-232 Conversion: (TXD, RXD, GND)
The 2,500Vrms Isolation Model is Available
Supports a 5-pin Terminal Blocks for TTL/COMS Signal Wiring
5V/3.3V Logic Level Selectable by DIP Switch
Signal Levels are Similar to Standard RS232 but in TTL/CMOS Swing Level
Supports 2,500Vrms Isolation for TTL/CMOS Signals
Easy Serial Port Expansion over USB Port
USB 1.1 and USB 2.0 Forward Compatible
Built-in FTDI USB UART Chip
Supports Serial Speed from 300bps to 921.6Kbps
Supports 7,8 Data Bits
Odd, Even, Mark, Space, None parity mode
Supports 1, or 2 Stop Bits
Supports Win98, Me, XP, CE, 2000, 2003, 2008 Win 7, Vista, Win 8, 10 Linux and Mac OS
Fully compatible with USB1.1 and Forward Compatible with USB 2.0

TTL/CMOS Serial Port::

Supports one 5-pin Terminal Block TTL/CMOS RS232 Serial port, the key benefits are:

Logic Levels: Selectable by a DIP Switch
Supports 2,500Vrms Isolation for TTL/CMOS Signals (TXD, RXD, GND)
Data Bits: 7, 8
Stop Bits: 1, 2
Parity: None, Odd, Even, Mark, Space
Baud Rate: 300bps to 921.6Kbps

OS Support:

Win 7, 8, 10, 11, Linux and Mac OS

Power Requirements:

USB Bus Powered, no External Power Supply Needed.

Environmental:

Operating Temp.: -40 to 85°C (-40 to 185°F)
Storage Temp: -40 to 85°C (-4 to 185°F)
Operating Humidity: 5 to 95% RH

Form Factor:
2.23(L to terminal block)x1.65(W)x.861in(H)
1.77”(L)x1.65”(W)x.861in(H) (4.49 x 4.18 x 2.20 cm)

Package Contents:

USB to RS232 Isolated TTL adapter
Driver Disc

Specifications

Product Specifications

Power

Adapter Power	USB Bus Powered
External Power Required	No

Compliance

Country of Origin	Taiwan
Certifications	REACH, RoHS, TAA Compliant

Physical Characteristics

Color	Black
Item Dimensions (L × W × H)	1.77 × 1.65 × 1.15 in.
Item Weight	3.7 oz.
Length	5ft
Material of Construction	Plastic

Serial Attributes

RS Signals	TxD, RxD, VOUT, VIN, GND
Serial Standards	RS232
Baud Rate	921.6K bps
Data Bits	7, 8
Parity	None, Even, Odd, Mark, Space
Stop Bits	1, 2
Flow Control	Hardware (RTS, CTS), XON/XOFF
Serial Ports	1

Software

OS Support

Win 7, Win 8, Win 10, Win 11, Linux, Mac OSX

Environmental

Operating Temperature	-40 to 85 C
Storage Temperature	-40°C to 85°C (-40°F to 185°F)
Humidity	5% ~ 95% (non-condensing)

Product Information

Warranty

1 year from date of purchase

Hardware

Upstream USB Ports

1 Type-A Male USB

Performance & Safety

Isolated/Surge Protected

Yes

Other Data

Connector	5-Pin Terminal Block
USB Interface	USB 2.0
Weight	0.412 lbs
Dimensions	8.937 × 6.312 × 1.612 in

UPC: 736983902382

Support

Product Documentation & Drivers

Product Documentation

Need drawings, CAD files, or other compliance documentation? Click HERE

Serial F.A.Q.

Product F.A.Q.

View frequently asked product questions below. For all serial troubleshooting, visit this page.
Still need help? Reach out!

Do these adapters require an external power supply?
Most of our single and dual-port models are USB bus-powered. High-density rackmount models (8-port+) feature integrated or external power supplies for maximum signal integrity.
What is the difference between an isolated and non-isolated serial adapter?
Isolated adapters use optical barriers to physically separate the electrical signals. This protects your computer from 2,500V surges and ground loops common in factory environments.
Can I use these adapters with Windows 11?
Yes, all Coolgear Serial adapters use modern FTDI or Silabs chipsets with WHQL-certified drivers for full Windows 11, Mac, and Linux support.
What is COM Port Retention and why do I need it?
COM Port Retention ensures that your assigned COM port number remains the same every time you plug in the adapter or reboot your PC. This prevents software communication errors and eliminates the need to manually reconfigure your application settings whenever hardware is moved.
How do I clean and reinstall my FTDI drivers?
View Answer
1. Download the CDM Uninstaller HERE.
  
  Extract the zip file, or open the “CDMuninstallerGUI.exe” utility.
  
  Leave the ‘Vendor ID’ set to 0403 and ‘Product ID’ set to 6001.
  
  Click Add.
  
  Click Remove Devices.
  
  Download the corresponding driver for your operating system and follow on-screen prompts. Windows Driver | MacOS Driver
Video tutorial here.
How can I change my device’s COM port?
View Answer
1. Click on Start and navigate to the Control Panel
  
  Locate and click on Device Manager
  
  Under “Ports (COM & LPT)” you will find your serial device titled “USB Serial Port” along with its current COM Port.
  
  Right click on “USB Serial Port” and click on Properties.
  
  Navigate to the “Port Settings” tab and click on “Advanced…”
  
  Once there, the “COM Port Number:” can be changed with a dropdown menu to select the port number.
  
  Click your desired port number (i.e. COM2) and click “OK”.
  
  Click “OK” once more.
  
  Your serial device is now assigned to your chosen COM Port.
How do I check to ensure the COM port is listed properly in Windows?
View Answer
To ensure your serial device is installed properly, complete the following:
1. Press Windows Key + R to open the Device Manager. Once Run comes up, type “devmgmt.msc” into the text field and press Enter.
2. Expand the section labeled, Ports (COM & LPT).
3. You should now see a COM number in brackets to the right of each port. If the device is installed properly, no exclamation points or question marks should be present next to the device.
I have everything hooked up, but nothing is functioning correctly.
View Answer
To rule out potential issues, quickly test your individual components to ensure that they are working correctly individually, and are not the source of the problem:
- Serial cables
- Serial ports
- Serial devices
Test your components by:
- Hook up the serial cable(s), serial port(s), and serial device(s) in a different setup to see if the issue stems from a particular component, or the setup as a whole.
- Replace the serial cable, port, or device within your setup to further troubleshoot the issue’s origin.
When testing cables:
- Test each cable individually.
- Use short cables when you are testing.
When testing serial ports and devices:
- Press the Windows key + R, in Run, type devmgmt.msc, and press Enter to open the Device Manager. You can then check to see if your device is listed under Ports (COM & LPT).
- Ensure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
- If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Serial communication is not functioning correctly, how can I tell if the problem caused by the adapter or my serial software application?

View Answer
Older serial communication applications make use of legacy hardware addresses, often incompatible with PCI, PCIe, and USB to Serial products. Contact the software provider to troubleshoot.
I am receiving an error when I try to install the drivers in Windows 8 64 bit.
View Answer
Driver Signature Enforcement in Windows 8 may need to be disabled in order to use various drivers. After disabling this feature, the driver will be allowed to install.

Note: You are required to restart your computer after disabling the Driver Signature Enforcement. Save all open work on your computer.

Disable driver signature enforcement:
1. Press the Windows key + C.
2. Click Settings > Change PC Settings.
3. In the left pane, click General.
4. In the right pane, under Advanced startup, click Restart now.
When your system restarts:
1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
2. Press 7.
When your computer restarts, Driver Signature Enforcement will be disabled and you can install the drivers.