Live Chat
1-888-688-2188
Mini USB 2.0 to RS-232 DB-9 Serial Adapter w/ 15kV ESD Protection & 3ft. USB Extension Cable
Model No.
USBG-232MINI
RS-232 | 128 Bytes Receive | 256 Bytes Transmit | FTDI
- Expand Your Serial Capabilities: The Mini Serial Adapter can be utilized through an existing USB Port to work with your legacy serial connections. It’s great for newer technologies with no serial port connections.
- Safe Connections: Designed with a unique system load reduction feature, the Mini USB to Serial Adapter also offers 15kV surge protection for connected devices.
- Upstream: 1 USB port, Type A Male Connector
- Downstream: 1 Male DB9, w/ nuts
- RS-232 Signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
- Transmit Buffer: 256 Bytes
- Receive Buffer: 128 Bytes
- LEDs: TX / RX
Quick Links:
Description
Mini USB RS-232 Introduction:
The USBG-232MINI serial adapter uses a Mini USB RS-232 format to synchronize your Handhelds, Digital Cameras, or other device currently using a serial port and works with your legacy serial connections. Connecting your serial devices to the newer computer equipment using USB bus technology gives you an advantage of adding one or more serial devices when needed. This adapter is hot plug compatible via its USB connector. The USBG-232MINI Mini USB RS-232 Serial Adapter is great for newer technologies with no serial port connections.
The high-speed DB-9 serial port with the 128 byte FIFO allows for high-speed communication between devices, even in heavy loaded systems. One of the unique features of this adapter is reduction of the system load. The serial port also allows unusual speed settings like 500.000bps. The USBG-232MINI also comes with a 3 foot USB Extension cable!
Mini USB RS-232 Features:
- Adds one RS-232 serial port by connecting to a USB port.
- Includes 3 foot USB extension cable.
- Compact size cable type converter with cable length of 25 cm
- Installed as standard Windows COM port
- Full RS-232 modem control signals and hardware/software flow control
- Transmit Buffer: 256 bytes
- Receive Buffer: 128 bytes
- RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
- High speed serial port with the baud rate up to 921.6K bps
- Non-standard baudrates supported
- LED status indicators for TxD and RxD for easy port monitoring and diagnostic
- Serial port protected with ESD protection of 15kV
- Powered by USB port, no external power adapter required
- Easy plug and play installation and RS-232 device connection
- COM port number assigned can be changed to any COM port number required
- Works with USB 1.1 & 2.0 host port
- Dimensions: (Adapter only) 65.50mm(L) x37.10mm(W) x 18.80mm(H)
OS Support:
- Windows Windows 7,8, 10, and 11
- Linux and Mac OS 10.X
- Note: As of June 2018 Windows XP is no longer supported. Please contact us if you require Windows XP support.
Package Contents:
- Mini USB 2.0 to RS-232 DB-9 Serial Adapter
- 3ft. USB Type-A Male to Type-A Female Cable
Compatibility List:
GPS / Chartplotters / Fish Finders:
- Magellan Sportrak GPS
- Garmin GPS III Plus
- Garmin eTrex Legend
- Garmin 76S GPS
- Garmin Rino 120
- Garmin Etrex
- Garmin GPS V
- Peets weather station
- Sky Caddie
- SkyCaddie SG2 Golf GPS
- Humminbird 767
- Megellan MAP330
WEATHER STATION:
- Oregon Scientific WMR-968
- La Crosse WS-3610
- Davis Vantage Pro II weather station
AMATEUR RADIO:
- Yaseu FT-950 Amateur Radio
- Kenwood TM-D710 ham radio
- TenTec RX320 shortwave radio receiver
- Kenwood TM-D710 dual band Amateur radio
Routers: (Connects to Cisco Console cable)
- Cisco 871
Cisco 2900/3900 XL
Cisco ASA5505
Cisco 678 DSL
Cisco 2621XM
MODEMS:
- US Robotics Courier dual standard V.34
- Zoom 56k external fax modem
Embroidery Machines:
- Bernina 180 embroidery machine
OBDII Data Analyers:
- Innova 3140 / 3160 OBD2
- Equus 3130 Innova Diagnostic Code Scanner
- Autel MaxiDAS
Telescopes / Solar Controllers:
- TS-60 Morningstar Solar Controller
- Celestron 5SE Telescope
- Celestron CGEM astronomy tracking mount
POLICE SCANNER RADIO:
- Uniden BCD396XT programmable radio
- Uniden 780XLT scanner
- Uniden Bearcat BC346XT scanner
Stenograph Writers:
- Stentura 200SRT
- Stentura 400SRT
- Stentura 500
- Stentura 6000
- Stentura 6000LX
- Stentura 8000
- Stentura 8000LX
- WAVE
- DIAMANTE
INDUSTRIAL EQUIPMENT:
- Brother wire EDM machine
- Graphtec plotter
MegaSquirt car tuning
SBC ALIX Firewall
Lynx6 AL5B robot arm (Karmic RC) Matlab 2009b
Pelouze scale
DVDO iScan Duo
CNC Machines:
- Strippit HECC80-3 CNC
PlusDeck
Suunto X6HR watch
Altec Digitizer Tablet
Data Logging Digital Multi-meter
Conext uninterrupted power supply
Automation System SLC 500
Keile Micro Controller
SEL-751A relays (needs null modem adapter & acselerator software )
URC remote controls MX-850
Summa Graphics D15 vinyl cutter
AUDIO DEVICES:
- Anthem MRX 300 A/V receiver
- Anthem MRX 500 receiver
- NuVo music system
APRS unit (Byonics RTG
iRobot Create
FreeScale Codewarrior
Technological Arts Adapt9S12C32 MCU
X10 CM11A
Crestron programmer
Zebra Label Printers
Specifications
Product Specifications
| Power |
| ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Compliance |
| ||||||||||||||||||||
| Physical Characteristics |
| ||||||||||||||||||||
| Serial Attributes |
| ||||||||||||||||||||
| Software |
| ||||||||||||||||||||
| Environmental |
| ||||||||||||||||||||
| Product Information |
| ||||||||||||||||||||
| Hardware |
| ||||||||||||||||||||
| Performance & Safety |
| ||||||||||||||||||||
| Other Data |
|
Pin-Out
DB9 RS-232 Pin-Outs
Serial F.A.Q.
Product F.A.Q.
View frequently asked product questions below. For all serial troubleshooting, visit this page.
Still need help? Reach out!
-
How do I clean and reinstall my FTDI drivers?
View Answer
-
- Download the CDM Uninstaller HERE.
- Extract the zip file, or open the “CDMuninstallerGUI.exe” utility.
- Leave the ‘Vendor ID’ set to 0403 and ‘Product ID’ set to 6001.
- Click Add.
- Click Remove Devices.
- Download the corresponding driver for your operating system and follow on-screen prompts. Windows Driver | MacOS Driver
-
-
How can I change my device’s COM port?
View Answer
-
- Click on Start and navigate to the Control Panel
- Locate and click on Device Manager
- Under “Ports (COM & LPT)” you will find your serial device titled “USB Serial Port” along with its current COM Port.
- Right click on “USB Serial Port” and click on Properties.
- Navigate to the “Port Settings” tab and click on “Advanced…”
- Once there, the “COM Port Number:” can be changed with a dropdown menu to select the port number.
- Click your desired port number (i.e. COM2) and click “OK”.
- Click “OK” once more.
- Your serial device is now assigned to your chosen COM Port.
-
-
How do I check to ensure the COM port is listed properly in Windows?
View AnswerTo ensure your serial device is installed properly, complete the following:
- Press Windows Key + R to open the Device Manager. Once Run comes up, type “devmgmt.msc” into the text field and press Enter.
- Expand the section labeled, Ports (COM & LPT).
- You should now see a COM number in brackets to the right of each port. If the device is installed properly, no exclamation points or question marks should be present next to the device.
-
I have everything hooked up, but nothing is functioning correctly.
View AnswerTo rule out potential issues, quickly test your individual components to ensure that they are working correctly individually, and are not the source of the problem:
- Serial cables
- Serial ports
- Serial devices
Test your components by:
- Hook up the serial cable(s), serial port(s), and serial device(s) in a different setup to see if the issue stems from a particular component, or the setup as a whole.
- Replace the serial cable, port, or device within your setup to further troubleshoot the issue’s origin.
When testing cables:
- Test each cable individually.
- Use short cables when you are testing.
When testing serial ports and devices:
- Press the Windows key + R, in Run, type devmgmt.msc, and press Enter to open the Device Manager. You can then check to see if your device is listed under Ports (COM & LPT).
- Ensure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
- If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
-
Serial communication is not functioning correctly, how can I tell if the problem caused by the adapter or my serial software application?
View AnswerOlder serial communication applications make use of legacy hardware addresses, often incompatible with PCI, PCIe, and USB to Serial products. Contact the software provider to troubleshoot.
-
I am receiving an error when I try to install the drivers in Windows 8 64 bit.
View AnswerDriver Signature Enforcement in Windows 8 may need to be disabled in order to use various drivers. After disabling this feature, the driver will be allowed to install.
Note: You are required to restart your computer after disabling the Driver Signature Enforcement. Save all open work on your computer.
Disable driver signature enforcement:
- Press the Windows key + C.
- Click Settings > Change PC Settings.
- In the left pane, click General.
- In the right pane, under Advanced startup, click Restart now.
When your system restarts:
- Click Troubleshoot > Advanced options > Startup Settings > Restart.
- Press 7.
When your computer restarts, Driver Signature Enforcement will be disabled and you can install the drivers.
-
I am receiving an error when I try to install the drivers in Windows 10 64 bit.
View AnswerDriver Signature Enforcement in Windows 10 may need to be disabled in order to use various drivers. After disabling this feature, the driver will be allowed to install.
Note: You are required to restart your computer after disabling the Driver Signature Enforcement. Save all open work on your computer.
Disable Driver Signature Enforcement:
- Click the Windows icon in the taskbar.
- Click Power.
- Press and hold the Shift key and click Restart.
After your computer restarts:
- Click Troubleshoot > Advanced Options > Startup Settings > Restart.
- Press 7.
When your computer restarts, Driver Signature Enforcement will be disabled and you can install the drivers.
-
Why did the software not install properly in macOS High Sierra (10.13) or later?
View AnswerHigh Sierra 10.13 and later versions of macOS enforce strict security policy revisions. In order for the device to operate, software packages like those used in this installation must be allowed in macOS Security and Privacy settings once the software is installed.
Once the driver/software is installed, follow these steps to allow the software:
- Open System Preferences.
- Open Security & Privacy.
- Click the Allow button near the bottom of the General tab.
Reviews (23)
23 reviews for Mini USB 2.0 to RS-232 DB-9 Serial Adapter w/ 15kV ESD Protection & 3ft. USB Extension Cable
Add a review
Support
Product Documentation & Drivers
Product Documentation
Software & Drivers
Need drawings, CAD files, or other compliance documentation? Click HERE
Optional Accessories
Optional Accessories
The 4 port USB 2.0 USB Hub has certain accessories that work with it. These hub accessories are what you can order if needed for this hub.
RS232 Male to Female Serial Data Cable Complete your serial data connection with this 5ft. RS232 DB-9 Male to Female data cable for fast reliable…
Model# 9DBMF5FT
$2.99In stock
Related products
Terminal Block Connector - Mini Serial RS232 This DB9 to Terminal is designed to convert the RS422/485 signals in a Micro sized package. The iSerial-TB5 DB9-Female…
Model# iSerial-TB5
$23.29In stock
RS232 to Ethernet - Two Port Adapter The MSD-SRF2X Dual port RS-232 to Ethernet data gateway will address the need to add 2 RS-232C devices…
Model# MSD-SRF2XM
$197.99In stock
RS-232 | 384 Bytes Receive | 128 Bytes Transmit | FTDI Expand Your Serial Capabilities: Connect your legacy 9-pin serial device through a USB-A port to…
Model# USB-COMiPLUS
$70.49In stock
RS-232 | 4096 Bytes (4 KB) Receive | 4096 Bytes (4 KB) Transmit | FTDI Expand Your Serial Capabilities: The dual port Serial Adapter can…
Model# XC-232-C
$68.99In stock
RS-232 | 128 Bytes Receive | 384 Bytes Transmit | FTDI Expand Your Serial Capabilities: Connect 2 legacy 9-pin serial devices through a USB-A port…
Model# USBG-232FT-1
$52.99Not in stock - Backorder allowed
Out of stock
RS-232 | 512 Bytes Receive | 512 Bytes Transmit Superior Build Quality: Housed in a rugged steel chassis with built in mountable flanges, the serial adapter…
Model# CM-41042
$287.29Out of stock
RS-232 | 512 Bytes Receive | 512 Bytes Transmit Superior Build Quality: Housed in a rugged steel chassis with optional mountable flanges, the serial adapter hub…
Model# USBG-8COM-M
$209.99In stock
RS-232 | 128 Bytes Receive | 384 Bytes Transmit | FTDI Expand Your Serial Capabilities: Connect 8 legacy 9-pin serial devices through a USB-A port…
Model# USB-8COM
$209.49In stock
Customer –
I bought this because I was having performance issues with another brand of adapter. I had read the reviews on this unit and it was touted as one that was highly compatible and trouble-free. This unit immediately cured all the issues I had been experiencing with my previous one, and I am extremely pleased with this unit. Skip the cheapies and go straight for this one if you want to minimize adapter-related problems.
wtxnitz –
This uses the FTDI chipset which is the only one which will work on Lion. The prolific chip
used in some other adapters just doesn’t work with Lion. A half star off for software on mini cd – not cool for Mac laptops. Another half star for the bulky connection. It blocks the other USB ports. I had to get a short USB extneder cable to use my mouse. Otherwise, with the right drivers, it DOES work with Lion.
J R T –
Product works exactly as advertised, gave me the serial port connectivity I needed to configure my switches and storage. Very fast shipping and didnt require any additional software on my Win 7 Dell laptop
Les1 –
work as promised finialy was able to update maps in my garmin 76s after replacing computors deliever within time said on ordered
Mary Ann Gephart –
My new HP laptop with Windows 7 does not have an RS-232 compatible port which is necessary for my old Garmin GPSmap 76. This serial adapter plugged right in and fixed my problem right out of the box. I am very happy with it.